This custom ZipperBuddy MagZip is made to order for your specific jacket.
Once your order is placed, our team will reach out to gather the details needed for your custom fit. You can also send them right away to custom@ZipperBuddy.com.
We’ll need the zipper length and a few close-up photos of the zipper slider to confirm the zipper type and correct side. Custom color requests may be available, but are not guaranteed.
Designed for stroke survivors, older adults, people with disabilities, busy parents, and anyone looking for an easier way to get dressed, ZipperBuddy MagZip brings more comfort, ease, and independence to everyday wear.
Because each custom ZipperBuddy MagZip is handmade for a specific garment, all custom orders are final sale.
ZipperBuddy MagZip — Size Finder
Find Your ZipperBuddy Match
Grab the jacket you want to use with ZipperBuddy — or send this quiz to the person you're gifting it to so they can check their jacket directly.
🎉 Complete the quiz to unlock free shipping
1
Zipper type
2
Measure length
3
Slider side
Step 1 of 3 — Zipper type
What type of teeth does your jacket zipper have?
Look closely at your zipper and match it to one of these. ZipperBuddy MagZip works with #5 plastic zippers — we'll confirm that next!
✓ Plastic / Vislon
Molded plastic teeth
Metal
Interlocking metal teeth
Coil / Nylon
Spiral/nylon teeth
Other / Not sure
Hard-to-identify teeth
Step 1 of 3 — Confirm zipper size
Does your zipper slider have a "5" stamped on the back?
Flip the zipper pull over. Look for numbers stamped into the back — a "5" means it's a #5 zipper, exactly what ZipperBuddy MagZip is made for.
Look for the "5" on the back of your zipper pull — it may appear as "5VSu" or similar
Step 2 of 3 — Zipper length
How would you like to measure your zipper?
Make sure your jacket is fully zipped before measuring. For the best fit, use a measuring tape if you have one.
📏
Measuring tape Most accurate
Measure from the top stop to the bottom stop of the zipper teeth for an exact length.
📷
Photo measuring tool
No tape? Take a photo of your zipper next to a sheet of printer paper and we measure it automatically — results are close but may vary slightly.
📱
iPhone Measure app
iPhone users: the built-in Measure app is highly accurate. Open it, point at the zipper, tap the length.
Step 2 of 3 — Photo measuring tool
Measure your zipper from a photo
1
Zip your jacket fully so the zipper is straight and taut top to bottom.
2
Lay the jacket flat on a table or floor, zipper facing up.
3
Place a standard 8.5×11 inch sheet of printer paper directly next to the zipper on the same flat surface — not under or on top of the jacket.
4
Photograph straight down from above so both the full zipper and full paper sheet are visible and flat.
5
Upload the photo below. Tap all 4 corners of the paper, then tap the very top and very bottom of the zipper teeth.
📷
Tap here to choose or take a photo
Tap 1 of 4: paper top-left corner
Step 2 of 3 — Zipper length
Enter your zipper length
Make sure your jacket is fully zipped before measuring.
inches
Step 2 of 3 — Zipper length
Here's what we found
Measured length
--
Recommended size
--
Not right? Tap Remeasure to go back and try again.
Step 3 of 3 — Slider side
Which side is the zipper slider on?
Hold your jacket facing you as if you're about to put it on. Which side is the zipper pull on when the zipper is open at the bottom?
Wearer's LEFT
Wearer's RIGHT
✓ Perfect Match
This ZipperBuddy MagZip matches your jacket's zipper type, size, and orientation. Handmade in Massachusetts — built for jackets like yours.
🎉 Free shipping unlocked!
Use at checkout
QUIZSHIP
🏷️ Save your result
Enter your email to get your size and discount code sent to you — so you never lose it.
✓ Sent! Check your inbox.
No thanks, skip
✨
Your jacket needs a custom ZipperBuddy
✓ Custom Match
We've got you covered
Our custom ZipperBuddy MagZip is made specifically for your jacket — same great quality, handmade in Massachusetts, built to fit your exact zipper.
✨ Your custom-fit perks are unlocked
10% off — use at checkout
CUSTOMVIP
Free shipping — use at checkout
CUSTOMSHIP
📸 Not sure? We'll help.
Drop your email and we'll reach out to help match your jacket — or send us a photo.
